PENGARUH ELECTROPOLISHING PADA BAJA TAHAN KARAT AISI 316L YANG MENGALAMI DEFORMASI DINGIN TERHADAP KEKASARAN DAN KEKERASAN PERMUKAAN UNTUK MENDUKUNG KEBUTUHAN MEDIS

Nurfi Ahmadi

Abstract

AISI 316L stainless steel is one of the metals that are widely used to meet medical needs. In its use of these materials must meet several requirements such is violence, corrosion resistance, wear resistance and tenacious. To meet these requirements, the modification techniques continue to be developed, such techniques include electropolishing techniques and cold deformation. This research will be carried out merging technique electropolishing and cold deformation which might be expected to obtain the quality 316L stainless steel is better. Research carried out by deform the specimen with a thick reduction of 40% and then do electropolishing process, then performed the test roughness and hardness on the surface of the specimen. Cold deformation 40% increase surface hardness up 105%  from the initial violence. Electropolishing can reduce the surface roughness of up to 14 times.

Keywords

cold deformation, electropolishing

References

Williams,D.F, 1987, Proceeding of a Consensus Conference of the European Society of Biomaterials, Elsevier, Amsterdam.

Bombac D.,Brojan M.,Fajfar P., Kosel F.,Turk R., 2007, Review of Material in Medical Aplications, RMZ-Material and Geoenvironment, Vol. 54, pp. 471-499.

Chen X.H., Lu.J.,Lu.L., dan Lu.K., 2005, The Properties of Nanocrystalline 316L Austenitic Stainless steel, Scripta Materalia, Vol. 52, pp. 1039-1044.

Dieter G.E., 1988, Mechanical Metalurgy, McGraw-Hill Book Company, S1 Metric edition, London,United Kingdom

Mahagaonkar S. B. dan Brahmankar P. K. , 2008, Effect of Shot peening Parameters on Microhardness of AISI 1045 and 316L material: an analysis using design of experiment, International Journal Advance Manufactur Technology, Vol.38, pp. 563–574.

Callister Jr.,W.D., 2001, Fundamentals of Materials Science and Engineering, Interactive e Text, John Wiley & Sons, Fifth Edition, New York, United States Of America.

Hryniewicz T., Rokosz K., and Filippi M., 2009, Biomaterials studies on AISI 316L Stainless Steel after Magnetoelectropolishing, Journal of Materials, Vol.2. pp. 129-145.

Huda Z., 2007, Effects of Degrees of Cold Working and Recrystallisation on the Microstructure and Hardness of Commercial-Purity Aluminum, European Journal of Scientific Research, Vol. 26, pp.549-557.

Milad, M., Zreiba, N., Elhalouani, F., Baradai C., 2008, The Effect of Cold Work on Structure and Properties of AISI 304 Stainless Steel, Journal of Materials Processing Technology, Vol. 203, pp. 80-85.

Article Metrics

Abstract view : 130 times
PDF (Bahasa Indonesia) - 141 times

Refbacks

  • There are currently no refbacks.