Effect of Welding Current on Mechanical Properties of Aluminum Alloys in Dissimilar Joint by GTAW Process

Riswanda Riswanda, Sugianto Sugianto

Abstract

Welding technique is one of the process connection metal in the manufacturing industry. Aluminum alloys have several advantages including: light, good electrical and corrosion resistant properties. Welding application of  dissimilar aluminum alloys with the  5083 and 6061-T6 series such as building structures, bridges, railroad frames, ships and oil platforms. The joining of dissimilar aluminum alloys by welding technique is difficult because the metal has different thermophysis properties. The study aimed of this research to analyze the mechanical properties of variation welding current on joint area GTAW. Visual observation shows that the joint specimen with the low current (100 A) has low penetration in welding groove, whereas at the high current (140 A) undercut occurs on the side of the weld seam, there are spatter and deposits (excessive added material). The hardness test with the current 120 A shows the regular distribution and has the highest tensile test of 201 MPa.

Keywords

Welding current, dissimilar, GTAW, aluminum alloys.

References

Vijay, S., Rajanarayanan, S., & Ganeshan, G. N. (2019). Analysis on mechanical properties of gas tungsten arc welded dissimilar aluminium alloy (Al2024 & Al6063). Materials Today: Proceedings.

Gejendhiran S dkk.(2014).A Study of Welding Parameters on Mechanicak Properties of Gas Metal Arc Welding and Gas Tungsten Arc Welding:A Review. International Journal of Advanced Engineering Research and Studies, E-ISSN2249-8974

R Ahmad. (2018).The Effect of Aging Time on Mechanical and Microstructure Properties of Aa6061 Joint Welded by Gas Tungsten Arc Welding. Joj Material Sci 4 (5) JOJMS ID 555646

Arun, M., & Ramachandran, K. (2015). Effect of welding process on mechanical and metallurgical properties of AA6061 aluminium alloy lap joint. International Journal of Mechanical Engineering and Research, 5, 162-178.

Balasubramanian, K., Balaji, N., & Rajesh, E. K. Mechanical Properties of Aluminum 6063 Alloy Joined by Tungsten Inert Gas Welding and Friction Stir Welding Methods.

Vijay Mohan Shetty, dkk. (2018). Optimizatio and Evaluation of Ageing Parameter on Mechanical Properties of AA 6061 and AA 5154 Welding Joint Using Taguchi Method. International Journal of Egineering Sciences & Research Technology, ICTM Value: 3.00 CODEN: IJESS7

Patil, P. C., & Shelke, R. D. (2015). Review on welding parameter effects on TIG welding of aluminium alloy. International Journal of Engineering Research and General Science, 3(3), 1479-1486.

Riswanda, R., & Ilman, M. N. (2012, July). Studi Komparasi Sambungan Las Dissimilar AA5083-AA6061-T6 Antara TIG dan FSW. In Prosiding Industrial Research Workshop and National Seminar (Vol. 3, pp. 75-79).

JIS. (1973). Non Ferrous Metal.Japanese International Standar.

Kou, S. (2003). Welding Metallurgy. 2 ed., John Wiley & Sons, Inc., Canada.

Article Metrics

Abstract view : 36 times

Refbacks

  • There are currently no refbacks.