ANALISIS TATA LETAK FASILITAS DENGAN MENGGUNAKAN METODE ACTIVITY RELATIONSHIP CHART PADA INDUSTRI MEBEL BAMBU KARYA MANUNGGAL YOGYAKARTA

Marni Astuti, Eko Poerwanto, Agus Trianingsih

Abstract


Plant layout or facilities layout is to fix regulate facilities layout with consider material handling flow. In this research on Bamboo Furniture Industry Karya Manunggal Yogyakarta show less precisely placement of production facilities and flow material resulting in the total distances of material handling becomes long and induce the total cost of material handling becomes high.

Improvement of facilities layout performed with qualitative methods ARC (Activity Relationship Chart). This matter do for obtain a new layout with minimum total distances of material handling and minimum total cost of material handling. In this research use POM QM Software for validating total distances of material handling.

Analysis result and designing facilities layout is a new layout with Rectilinear Distance method, The initial movement distances is 1.922,9 m become 1.832,35 m or have a reduction distances 4,94 % from initial layout. While for the initial total cost of material handling is Rp 200.135,6 become Rp 199.745,9 or have a reduction cost 0,19% from initial layout. Existence a new layout based on ARC be expected on the production floor of Bamboo Furniture Industry Karya Manunggal Yogyakarta.


Keywords


Layout, Qualitative Method (ARC), Rectilinear Distance, Distance of material handling, Cost of material handling

Full Text:

PDF

References


Eko, P., Cahyono, B., N., 2014, Analisis Tata Letak Proyek Menggunakan Activity Relationship Chart dan Multi-Objectives Function pada Proyek Pembangunan Apartemen De Papilio Surabaya, Jurnal Teknik POMITS, Vol 3, D131-D136.

Abdillah Z, I., 2014. Perancangan Ulang Tata Letak Fasilitas Produksi dengan Menggunakan Metode Kualitatif (ARC) dan Algoritma CRAFT pada UD. Roti Bangkit Yogyakarta. Jurusan Teknik Industri, Sekolah Tinggi Teknologi Adisutjipto (STTA), Yogyakarta

Ambika, S. 2013. Performance Enhancement in a Print Pack Firm by Layout Optimization. Departement of Printing Technology. Avinashilingan Institute For Home Science and Higher Education For Women, University, Coimbatore, Tamil Nadu, India.

Apple, James, M., 1990, Tata Letak Pabrik dan Pemindahan Bahan, Edisi Ketiga, Terjemahan Nurhayati., Merdiono, ITB, Bandung.

Hadiguna, R, ST., MT., Setiawan, H. ST., MT., Tata Letak Pabrik. Penerbit ANDI, Yogyakarta

Harahap Sorimuda 2006, Perencanaan Pabrik, Penerbit GRAHA ILMU, Yogyakarta

Wignjosoebroto, S. 1996. Tata Letak Pabrik dan Pemindahan Bahan. Penerbit Guna Widya. Surabaya.




DOI: http://dx.doi.org/10.28989/senatik.v3i0.137

Article Metrics

Abstract view : 275 times
PDF - 128 times

Refbacks

  • There are currently no refbacks.




Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Conference SENATIK P-ISSN :2337-3881 and  E-ISSN : 2528-1666